Key takeaways A customer calls asking for a tripod for a manhole entry. You ask two more questions and the spec changes: the opening is offset, overhead clearance is tight, and the rescue plan depends on non-entry retrieval. That is where confined space entry decisions usually go wrong. Buyers start with a single component, but
Key takeaways On most roofs, the wrong recommendation isn’t a non-compliant one. It’s a technically compliant system that doesn’t match how the roof is actually used. That’s where rooftop fall protection decisions break down. A facility may have routine HVAC service, occasional edge work, outside vendors accessing the roof, and a hatch opening that needs
Key takeaways If you’re responsible for specifying fall protection for a crew, “best fall protection harness” is usually the wrong question. A roofing crew tying off to overhead anchors, a utility technician climbing a fixed ladder, a welder working around heat and sparks, and an entrant in a confined space don’t need the same harness,
Key takeaways The hardest horizontal lifeline recommendation usually isn’t the obvious one. It’s the job where a customer says they just need a cable and two anchors, but the application involves a long span, more than one worker, limited clearance, or a layout that doesn’t fit a standard kit. That’s where the question of an
Most people sourcing fall protection for a fixed ladder already know they need it. The harder question is which system actually fits the ladder geometry, the structure it’s mounted to, how often workers climb it, and the compliance requirements for that specific installation. A cable-climb system and a rigid-rail system are both ladder safety devices,
When a customer needs to protect workers moving across a span like walking a catwalk, working along a steel beam, or servicing equipment on a flat roof, a horizontal lifeline system is often the right answer. But “horizontal lifeline” covers more ground than most buyers realize, and recommending the wrong type can mean an incompatible
Picture this: you’re twenty-five feet in the air standing on a steel beam completely exposed to the elements. The only thing keeping you safe from taking a fall is a full-body harness and properly tied-off lanyard. Good thing you were trained correctly on your fall protection system. Surely, if you took a fall from this
When it comes to working at heights, ensuring proper fall protection is crucial for the safety of workers. Whether you’re operating a boom lift or a scissor lift, understanding aerial lift fall protection requirements is essential to keep yourself and your team safe. In this guide, we’ll cover OSHA’s requirements for both aerial lifts and
Confined space tripods are a critical piece of safety equipment for workers entering manholes, tanks, vaults, and other permit-required confined spaces. The Occupational Safety and Health Administration (OSHA) has established specific requirements for confined space tripods and retrieval systems to protect workers during entry, descent, and emergency rescue. As a manufacturer of fall protection equipment,