Key takeaways A customer calls asking for a tripod for a manhole entry. You ask two more questions and the spec changes: the opening is offset, overhead clearance is tight, and the rescue plan depends on non-entry retrieval. That is where confined space entry decisions usually go wrong. Buyers start with a single component, but […]
READ MOREKey takeaways On most roofs, the wrong recommendation isn’t a non-compliant one. It’s a technically compliant system that doesn’t match how the roof is actually used. That’s where rooftop fall protection decisions break down. A facility may have routine HVAC service, occasional edge work, outside vendors accessing the roof, and a hatch opening that needs […]
READ MOREKey takeaways If you’re responsible for specifying fall protection for a crew, “best fall protection harness” is usually the wrong question. A roofing crew tying off to overhead anchors, a utility technician climbing a fixed ladder, a welder working around heat and sparks, and an entrant in a confined space don’t need the same harness, […]
READ MOREKey takeaways The hardest horizontal lifeline recommendation usually isn’t the obvious one. It’s the job where a customer says they just need a cable and two anchors, but the application involves a long span, more than one worker, limited clearance, or a layout that doesn’t fit a standard kit. That’s where the question of an […]
READ MOREMost people sourcing fall protection for a fixed ladder already know they need it. The harder question is which system actually fits the ladder geometry, the structure it’s mounted to, how often workers climb it, and the compliance requirements for that specific installation. A cable-climb system and a rigid-rail system are both ladder safety devices, […]
READ MOREWhen a customer needs to protect workers moving across a span like walking a catwalk, working along a steel beam, or servicing equipment on a flat roof, a horizontal lifeline system is often the right answer. But “horizontal lifeline” covers more ground than most buyers realize, and recommending the wrong type can mean an incompatible […]
READ MOREJoin FCFS and thousands of companies nationwide in building safer job sites through practical, hands-on safety education — during OSHA’s Safety Stand-Down Week, May 6–10, 2025. Why Safety Stand-Down Week Is Important — And How to Make It Count Falls remain the #1 cause of workplace fatalities, according to OSHA. Yet every year, companies struggle […]
READ MOREBecoming a distributor with the right manufacturer can open doors to new opportunities and strengthen your business’s product lineup. If you’re considering partnering with FrenchCreek Fall Safety, you’ll be joining a team that prioritizes quality, reliability, and customer safety above all else. FrenchCreek, known for its craftsmanship, is dedicated to providing fall protection equipment that […]
READ MOREWhen it comes to fall protection equipment, choosing the right manufacturer isn’t just about finding quality products—it’s about building a lasting partnership that helps your business thrive. That’s where FrenchCreek Fall Safety stands out. At FrenchCreek, we understand that distributors like you need more than just reliable equipment. You need a partner who’s invested in […]
READ MORE