FrenchCreek Blog

Introducing the FrenchCreek 8′ Class 2 Personal SRL: Compact Protection for Smarter Tie-Off

New Product Launch Introducing the FrenchCreek 8′ Class 2 Personal SRL The new FrenchCreek 8′ Class 2 Personal SRL is a compact self-retracting lifeline built for mobility, 100% tie-off, and smarter fall protection planning on demanding jobsites. 8′ compact length Class 2 SRL Dual-leg design Steel cable lifeline Class 2 capability is important, but it […]

READ MORE

Portable Guardrail Systems: A Safer Solution for Rooftop Fall Prevention.

Fall Prevention Safety Guide The Best Fall Protection Is Preventing the Fall in the First Place Harnesses, lanyards, and self-retracting lifelines save lives every day. But when a fall hazard can be eliminated or controlled with a passive system, workers are protected before a fall can happen. Passive fall protection Hierarchy of fall protection GR200 […]

READ MORE

Confined Space Entry Equipment: A Distributor’s Guide to Tripods, Davits, and Retrieval Systems 

Key takeaways A customer calls asking for a tripod for a manhole entry. You ask two more questions and the spec changes: the opening is offset, overhead clearance is tight, and the rescue plan depends on non-entry retrieval. That is where confined space entry decisions usually go wrong. Buyers start with a single component, but […]

READ MORE

Horizontal Lifeline vs. Guardrail vs. Personal Fall Arrest: How to Recommend the Right Rooftop Fall Protection System 

Key takeaways On most roofs, the wrong recommendation isn’t a non-compliant one. It’s a technically compliant system that doesn’t match how the roof is actually used. That’s where rooftop fall protection decisions break down. A facility may have routine HVAC service, occasional edge work, outside vendors accessing the roof, and a hatch opening that needs […]

READ MORE

Full Body Harness Selection Guide: Choosing the Best Fall Protection Harness for the Application 

Key takeaways If you’re responsible for specifying fall protection for a crew, “best fall protection harness” is usually the wrong question. A roofing crew tying off to overhead anchors, a utility technician climbing a fixed ladder, a welder working around heat and sparks, and an entrant in a confined space don’t need the same harness, […]

READ MORE

Engineered vs. Non-Engineered Horizontal Lifelines: What the Difference Means for Your Customers  

Key takeaways The hardest horizontal lifeline recommendation usually isn’t the obvious one. It’s the job where a customer says they just need a cable and two anchors, but the application involves a long span, more than one worker, limited clearance, or a layout that doesn’t fit a standard kit. That’s where the question of an […]

READ MORE

How to Choose the Best Ladder Fall Arrest System for a Fixed Ladder 

Most people sourcing fall protection for a fixed ladder already know they need it. The harder question is which system actually fits the ladder geometry, the structure it’s mounted to, how often workers climb it, and the compliance requirements for that specific installation. A cable-climb system and a rigid-rail system are both ladder safety devices, […]

READ MORE

Horizontal Lifeline Systems: The Complete Product Guide for Safety Distributors 

When a customer needs to protect workers moving across a span like walking a catwalk, working along a steel beam, or servicing equipment on a flat roof, a horizontal lifeline system is often the right answer. But “horizontal lifeline” covers more ground than most buyers realize, and recommending the wrong type can mean an incompatible […]

READ MORE

How To Calculate Fall Clearance Like A Pro: Distances, Formulas & More

Picture this: you’re twenty-five feet in the air standing on a steel beam completely exposed to the elements. The only thing keeping you safe from taking a fall is a full-body harness and properly tied-off lanyard. Good thing you were trained correctly on your fall protection system. Surely, if you took a fall from this […]

READ MORE